10.0.0.0.1 is the IP address used by most of the routers, for making their configuration settings. The 10.0.0.0.1 Admin is the command used while making network changes. In this guide, we will be giving you full instructions for configuring your router using 10.0.0.0.1 Login and 10.0.0.0.1 Admin Login. This is the default ip address of every router and helps to configure it. This IP including 10.0.0.0.1 is the best among all in terms of the router configuration.While trying to make a login to the router 10.0.0.0.1 / 10.0.0.1 you can also try to find the IP address of the corresponding router using the combo box below. The below combo box contains all the brand names of the router and also the respective IP addresses.
10.0.0.0.1 Admin Login Setup Settings
10.0.0.0.1 Login Admin is very easy to setup. Before we proceed towards how to configure your router with http //10.0.0.0.1 you must have a laptop or personal computer, a router and a active internet connection. The router’s settings once made can changed later on also. 10.0.0.0.1 Login Admin is also opened by some router companies for setting up the modems. The default ip for router setup can be opened in browser by copying and pasting http 10.0.0.0.1 in the address bar. IP address is the basic unit of every internet network connection.
Access Your Router Panel
How to Configure Router using 10.0.0.0.1 IP Address ?
- Open the default browser on your PC.
- In the address menu, type 10.0.0.0.1
- Then, enter the default username and password to login into the configuration window.
- Press enter key, select advanced setup from the menu which appears.
- In the left side menu of the page.
- Select PPPOe or Bridge Mode.
- Enter the Login details provided by your Internet Service Provider.
- Click Save button and Reboot the router.
- Open 10.0.0.0.1 every time you wish to make the router settings.
Why is 10.0.0.0.1 Admin and 10.0.0.0.1 Login Used ?
These both commands are used in order to make the configuration settings of modems. It doesn’t matters which brand you are using, these addresses are universal and can be opened on any computer. 192.168.l.l Admin Login is used by most of the router brands to login into the admin panel. 10.0.0.0.1 can also be accessed from the admin menu of 10.0.0.0.1 IP address.
These above listed usernames and passwords are the default ones for every router which you will require in order to login into 10.0.0.0.1 and perform the configuration settings. After you login with these note it down, so that it becomes easier for you to login next time with the default id and password of your router. You can also have a look at the backside of the routers, some companies mention the default credentials there also. 10.0.0.0.1 IP Address helps a lot for all the internet settings.
Changing WEP/WPA Key of Router using 10.0.0.0.1 IP Address
- You must open any browser, we recommend using internet explorer.
- In the address menu bar type 10.0.0.0.1 which is the default ip address of every router.
- Click the security option in the menu.
- Now, enter a strong Key as per your choice.
- Press Save and Reboot after that.
- You are done setting up a unique Wep/Wpa key for router. Check it for sure and run the internet connection after it.
How to do Router Login With 10.0.0.0.1 Admin IP Address
- You need to click on the browser
- Then you have to surf through the page 10.0.0.0.1 Login
- Enter the Id and Pass.
- Change the Settings.
- Reboot the modem.
- Clear history and cookies in your browser before accessing the internet.
How to configure your router using 10.0.0.0.1
Configuring router has always been a kind of job where many users fail eventually. The router will only work if all the settings and setup are made in a proper manner. Here we are about to share few steps to configure your router with the IP address 10.0.0.0.1 really very quickly. This IP address lets you setup the router network settings according to your needs. Just use this IP whenever you face any kind of problem.
Step 1: Un- box the router and check for other facilitated items
Routers generally come in wrapped boxes with some cables and user manual. It is the responsibility of a user to check all the items are present or not. Then, look at the back of the modem there are some details mentioned.
Step 2: Make proper connections
First, you’ll need to identify all the ports given to the router. In a Router, 4 LAN ports and one internet is present. Connect your router to the broadband modem through a short Ethernet cable. Connect the modem to Internet port of the router. The router is assigned a private IP address specifically for a small area usage like a house.
Step 3: Connect to computer
Your LAN port should be connected to the computer via an Ethernet cable which will enable network for your computer. You can also connect to a laptop as the WiFi network name and the default password will be printed on the router’s label.
Step 4: Open web browser and type https://10.0.0.0.1
In order to change and customize your router settings, you need to login in the default web page of the router provided by the company. Open up a new tab and type this URL in the browser
https://10.0.0.1 or http://10.0.0.0.1/
When the entered URL is absolutely correct, then you’ll be able to see the login page. But what if an error occurred
The common problem while you try to configure the router using IP address 10.0.0.0.1 is the IP address itself. Many people enter wrong IP address like 192.168.l.l and try to configure their router but error page is loaded always. the entered IP address 192.168.l.l is actually a wrong IP address.
Every IP address is divided into four segments. Let’s say each segment to be X. Each of this segment is linked to each other with the symbol ‘.’. X.X.X.X is actually basic syntax for IP address. Each of the X can take value from 0 to 256 only. No alphabets and symbols can be considered.
The IP address 10.0.0.0.1 is wrong because of user use ‘L’ symbol instead of ‘1’. But when right IP address is typed in the search box of the browser them login page will appear surely.
Step 5: Enter username and password
Once the login page appears, after you open 192.168.1.1 in the internet explorer, you can enter your default username and password is given to you by the router manufacturer. Once logged into the router, you can customize your router based on your requirements and change its settings. The router admin panel has various settings related to security, advanced setup etc. The admin panel must be logged out after making all the configuration changes.
Step 6: connect other devices with pc
Once your router is configured using IP address 192.168.1.1 you’ll be able to create a wireless network for other devices also or in short let us say WIFI. You can connect to WIFI by using the password provided by the ISP( Internet Service Provider). In some cases you must call the helpline number of your internet service provider and ask them for the same, they have all the details about the router. After connecting other devices to the router, you can access the internet at a really faster speed. This ip will help you to setup your router for all the settings. You should always Save the settings and reboot the router.
If you feel that this IP 10.0.0.0.1 is not your router’s IP then check the below IPs
These are the things that you know about the 10.0.0.0.1 router IP
Conclusion for 10.0.0.0.1 Admin Login Online :
You can use the above listed default router login passwords for opening the router admin panel. These 10.0.0.0.1 Admin passwords are for different router brands. Once you use these 10.0.0.0.1 Admin Login details you will be able to configure your routers. If you face any issue while making the 10.0.0.0.1 Settings Online you can comment below without any hesitation.
Review about this content
Little Final Summary
The above post explains the ways that you can use to login to the router IP address 10.0.0.0.1 Here the steps explained are little detailed and of much useful.